IAI America SEP-PT - Manual (Page 78)

72
No. Operation Window Remarks
6 Touch the Single.
The Single Solenoid
Operation Mode will be
selected.
Selecting Back returns to
the preceding window.
When MENU is touched, the
SEP-PT MENU window is
returned.
7 Touch the Non-use.
“Non-use” for the STOP
Command (*STP) will be
selected.
Selecting Back returns to
the preceding window.
When MENU is touched, the
SEP-PT MENU window is
returned.
8 Touch the Control.
“Control” for the Servo-Motor
Control will be selected.
Selecting Back returns to
the preceding window.
When MENU is touched, the
SEP-PT MENU window is
returned.
9
Touch the .
Touch the OK.
“HEND” and “
ALM” will be
selected as outputs
respectively for OUT2 and
OUT3.
Selecting Back returns to
the preceding window.
When MENU is touched, the
SEP-PT MENU window is
returned.
10 Touch the AUTO.
“AUTO” will be selected for
the Home Return.
Selecting Back returns to
the preceding window.
When MENU is touched, the
SEP-PT MENU window is
returned.
11 Touch the Limit SW.
“LS0” (Backward Position
Detection) and “LS1”
(Forward Position Detection)
are selected for output
signals.
Selecting Back returns to
the preceding window.
When MENU is touched, the
SEP-PT MENU window is
returned.
12 Touch the Complete. When Retry is touched, the
Operation Pattern window is
returned.
Selecting Back returns to
the preceding window.
When MENU is touched, the
SEP-PT MENU window is
returned.
HEND
ALM