IAI America SEP-PT - Manual (Page 96)

90
Operation Pattern 5 (Continuous Reciprocating Operation) is partly different from the other
Operation Patterns.
x Start, Stop : When the Operation Test window is displayed, the Continuous Operation is
stopped.
Touching Start performs the continuous reciprocating operation at the speed
set in the Override window.
The switch indication is changed to STOP.
Touching STOP stops the actuator operation.
x Reset
: Touching CLR resets the reciprocating operation counter to “0”.
When the Operation Test window is escaped, the Continuous Operation is re-started up.
The current position of the axis is shown.
The Axis’s reciprocating operation times are shown.