IAI America SEP-PT - Manual (Page 15)

9
1. Basic Specifications
In this touch panel teaching unit, the operations are performed on the display panel. This unit
is used for indicating or editing the data (parameter data, position data, etc.) to be saved in the
controller by means of the communication with the controller. This unit is used to perform the
offline teaching (teaching operation) or alarm confirmation, without host PLC.
Item Specification
Power Demand 1.1W or less (220mA or less)
Surrounding air
temperature, humidity Temperature 0 to 50
qC Humidity 20 to 85% RH
(There should be no dew condensation)
Surrounding storage
temperature, humidity Temperature -20 to 60 qC Humidity 10 to 85% RH
(There should be no dew condensation)
Vibration resistance (Test Condition) 10 to 55Hz (Frequency 1 minute)
Duplex Amplitude 0.75mmX,Y,Z Direction for 10 minutes
Impact Resistance (Test Condition) 9.8m/s
2
or more X,Y,Z Direction Four Times
Environment
Resistance
IP40
Dimensions 180mm(L)
u132mm(W)u92.1mm(D)
Mass Approx. 550g (Including the 5m cable)
Cable length 5m(Standard)
Accessories Touch Pen