IAI America SEP-PT - Manual (Page 132)

126
2) Direct Teaching (Method where the slider is moved manually to the target position and the
position (current position) is captured as the Forward Position or Backward Position)
Explained below is the case for 2-point stop as an example.
The procedure for capturing the current position of “50.0mm” in the Backward Position (Forward
Point)).
No. Operation Window Remarks
1 Touch Pos. Edit in the MEC
MENU window.
2 In the case of the password
value except for “0000”, the
password input window is
displayed.
Input the password. The password for positioning
command can be set in
‘parameter No. 20 Password
for Position Data Edit’ under
Parameter Edit.
3 Set the backward position
(stop position on the forward
point), the positions related
to it and acceleration/
deceleration speed.
Touch the BackwardPos.
When MENU is touched, the
MEC MENU window is
returned.
4 Touch the JOG. Touching Tb1 return to the
Forward Position/Backward
Position setting window in
the Position Setting window.
5 When the home return
operation has not been
completed, the window for
performing the home return
operation is displayed.
When the home return
operation has been
completed, go to operation
step No. 8.
Touch YES to perform the
home return operation.
6 Touch the OK.