IAI America SEP-PT - Manual (Page 67)

61
4.2.7 I/O Setup (Settings of Operation Parameters, etc.)
In this operation, the Operation Pattern (PIO Pattern) (0 to 5) is selected and Operation Mode
(Single Solenoid or Double Solenoid) is set.
Touch Initial set in the SEP-PT MENU window.
Touch the I/O set.
When MENU is touched, the SEP-PT MENU window is
returned.
Before the window is transferred to the “Initialization” window, the password entry window
appears.
Enter the value as the password using the ten-key and
touch
.
When the correct password is set, the Operation Pattern setting window is displayed.
Select one of Operation Patterns 0 through 5 and touch it.
The password has been set to “5119” when
the unit was shipped from the factory.