IAI America SEP-PT - Manual (Page 141)

135
5) Pressing Operation (Pressing Force and Pressing Width) Setting
I Explained below is the case for 2-point stop as an example.
The procedure is described taking the pressing operation performed at the backward position
(Forward Point) as an example.
Pressing Force:50%, Pressing Width:5.0mm
No. Operation Window Remarks
1 Touch Pos. Edit in the MEC
MENU window.
2 In the case of the password
value except for “0000”, the
password input window is
displayed.
Input the password. The password for positioning
command can be set in
‘parameter No. 20 Password
for Position Data Edit’ under
Parameter Edit.
3 Set the backward position
(stop position on the forward
point), the positions related
to it and acceleration/
deceleration speed.
Touch the BackwardPos.
When MENU is touched, the
MEC MENU window is
returned.
4 Touch the PUSH . Touching Tb1 return to the
Forward Position/Backward
Position setting window in
the Position Setting window.
5 Touch the Push Power
value. Touching MENU return to
the Forward Position
/Backward Position setting
window in the Position
Setting window.
6 Touch 5 and 0 and
then . When the value input is
stopped, touch ESC.
The value will not be set and
the previous
“Position/Velocity setting
window” in the Position
Setting window will be
returned.