IAI America SEP-PT - Manual (Page 24)

18
4.2.3 Menu Selection
There are four menu items in the SET-PT MENU window. Select one of them and touch it.
The window is transferred to one for the selected menu.
Menu List
x Monitor
Controller Status Display [Refer to Item 4.2.4]
x Pos Edit Setting of Position, Pressing Force and Pressing Width, Jog Movement
[Refer to Item 4.2.5]
x Information
Data Display for the Operation Pattern or Version
[Refer to Item 4.2.6]
x Initial set
Touching Initial set transfers to the Initial Setting Menu window where the next selection is to
be performed.
There are four menu items in the Initial Setting Menu window. Touch the menu to select it.
The window will display the selected menu.
When MENU is touched, the previous “SEP-PT Menu” window is returned.
Initial Setting Menu List
x I/O set Selection of Operation Pattern (PIO Pattern) (0 to 5) and Setting of
Operation Mode (Single Solenoid or Double Solenoid)
[Refer to Item 4.2.7]
x Parameter
Parameter Setting for Positioning Width Initial Value, etc.
[Refer to Item 4.2.8]
x Test
I/O Test and Axis Movement Operation Test
[Refer to Item 4.2.9]
x Envi.Set
Environment Setup such as touch sound setting
[Refer to Item 4.2.10]