IAI America SEP-PT - Manual (Page 50)

44
No. Operation Window Remarks
7 Perform the home return
operation. Touching STOP stops the
home return operation.
8 When the servo-motor is
turned ON, touch SON to
turned OFF the servo-motor.
9 Move the slider and rod
manually and align the
actuator with the target
position of 50.0mm.
Touch the Get.
10 Touch the ESC.
11 “50.00” is displayed in the
position data section. It is
confirmed that the position
data has been captured.
Touching Tb1 return to the
Forward Position/Backward
Position setting window in
the Position Setting window.
12 Touch the WRT. Touching Tb1 return to the
Forward Position/Backward
Position setting window in
the Position Setting window.
When the writing is not
performed and the “Forward
Position/Backward Position”
selecting window in the
Position Setting window is
returned, the setting is not
performed.
13 Touch the YES. Touching NO returns to the
Position Setting window
without performing the
setting.