IAI America SEP-PT - Manual (Page 148)

142
5.2.7 Test Play
Operation check for the axis movement can be performed.
Touch Test Play in MEC MENU window.
Operation check for the axis movement can be performed.
Shown below is how to operate 3-point stop as an example.
When MENU is touched, the MEC MENU window is
returned.
x Backward
: When BW is pressed, the actuator is moved backward.
x Intermediate : Touch CP to move to the intermediate point.
x Forward
: When FW is pressed, the actuator is moved forward.
x Override 10% : When 10% is touched, the actuator is moved at 10% of the speed set in
the “Target Position/Velocity” window in the “Position Setting” window. In
the first displayed window, the “10%” has been set.
x Override 50% : When 50% is touched, the actuator is moved at 50% of the speed set in
the “Target Position/Velocity” window in the “Position Setting” window.
x Override 100% : When 100% is touched, the actuator is moved at 100% of the speed set in
the “Target Position/Velocity” window in the “Position Setting” window.
The current position of the axis is shown. ውዌዌዊዌዌ