ZOLL Propaq MD Rev A - Manual (Page 10)

C HAPTER 1 M AINTENANCE T ESTS
6 9650-0807-01 Rev. A
This chapter describes the following maintenance tests:
• Physical Inspection of the Unit
• Operational Tests
• Leads Test
• Heart Rate Display Test
• Heart Rate Alarm Test
• Leakage Current Test
• Shock Test
• Advisory Test
• Synchronized Cardioversion Test
• Pacer Test
• Printer Test
• Treatment Report Test
• SpO
2
Monitor Test
• EtCO
2
Calibration
• EtCO
2
Calibration Check
• EtCO
2
Monitor Test
• IBP Monitor Test
• NIBP Calibration Test
• NIBP Leak Test
• Deflation Test
• Inflation Test
• NIBP Monitor Test
• Temperature Test
Before You Begin the Maintenance Tests
• Assemble the tools listed in following section, “Equipment You Need to Perform the
Maintenance Tests.”
• Keep an extra fully charged Propaq MD battery available.
• Schedule an hour to conduct the entire maintenance test.
• Perform the tests in the order presented.
• Perform all the steps of each test procedure.
• Complete all the steps of the procedure before evaluating the test results.