Removing the handle – ZOLL Propaq MD Rev A User Manual
Page 65
Advertising
Removing the Handle
9650-0807-01 Rev. A
Propaq MD Service Manual
61
Removing the Handle
Tools Required
•
#1 Phillips screwdriver with torque capability
•
Wooden stick
Setup
•
This procedure should be conducted on a static mat.
•
Wear a wrist strap to ground during the procedure.
To reinstall the handle assembly, reverse the steps.
Handle Disassembly
1
Using a wooden stick, lift the screw covers
off the handle in two locations.
2
Remove four (4) screws (2 on each handle)
and remove the handle.
Note: During reassembly, torque screws to
8 in-lbs.
screw
covers
screws
Advertising