ZOLL Propaq MD Rev A - Manual (Page 52)

C HAPTER 2 T ROUBLESHOOTING
48 9650-0807-01 Rev. A
Error Message Explanation Technical Action
ALARM SILENCE SHORT Alarm Silence/Reset key is
stuck. Replace the front panel.
BLUETOOTH PHONE
UNAVAILABLE The Propaq MD unit was
unable to establish a Wide
Area Network connection.
None of the Bluetooth
phones paired with the
device were detected. To correct the problem,
verify the following:
• The Bluetooth device is
paired with the Propaq
MD unit.
• The phone is on and
near enough to the
device to permit
communication.
• The phone is configured
to allow data connection
requests (if the phone
has such a configuration
setting).
CELLULAR CONNECT
FAILURE The Propaq MD unit was
unable to establish a Wide
Area Network connection. A
cellular modem or Bluetooth
cellular phone connection
was attempted, but failed. To correct the problem,
verify the following:
• The cellular provider
information, particularly
the call number, is
correctly configured.
• The cellular device has
an active plan.
• There is adequate
cellular network signal
coverage in the area.
• (For phones) The phone
is configured to allow
data connection
requests (if the phone
has such a configuration
setting).
• (For modems) The
cellular modem is a
supported device and is
securely connected to
the Propaq MD unit.
If all the configurations are
correct, retry the operation.