ZOLL Propaq MD Rev A - Manual (Page 11)

Propaq MD Overview
9650-0807-01 Rev. A Propaq MD Service Manual 7
Equipment You Need to Perform the Maintenance Tests
The equipment listed below is used in the maintenance procedures in this chapter. You can
substitute an equivalent device; however, not all simulators and analyzers will produce the
same results. Be sure to follow the manufacturer’s recommendations for conducting the
maintenance tests.
• Fluke Impulse 7000DP Analyzer, with appropriate interface adapter (Fluke Biomedical
BP Pump/Dynatech Nevada Inc. part number 3010-0378)
• ECG simulator
• Fluke Index 2 SpO
2
simulator
• IBP/Temp simulator
• NIBP simulator
• 5% CO
2
calibration gas cylinder with CO
2
sample line (kit available from Scott Medical
Products, PN 4653ORF-BD)
• CO
2
sampling line airway adapter
• Stop watch
• Battery Current Test Fixture 9100-3055-TF
• Agilent E3633A Power Supply
• Agilent 34401 Digital Multi-meter
Accessories You Need for the Propaq MD Options Maintenance Tests
• 3-lead, 5-lead and 12-lead ECG cables. (12-lead cable needed if 12-lead option is
installed.)
• Dual lumen NIBP hose
• IBP cable
• SpO
2
cable and sensor
• EtCO
2
cable and sensor
• Paddles
• Printer paper
• Battery
• Auxiliary power source
• USB thumb drive