ZOLL Propaq MD Rev A - Manual (Page 48)

C HAPTER 1 M AINTENANCE T ESTS
44 9650-0807-01 Rev. A
Wi-Fi Test (Optional)
Test Setup Have router set up with the following settings:
• SSID= WATS
• Authentication= WPA-PSK
• Security Key=0123456789
Do This... Observe This... Pass/Fail
1. Turn on the Propaq MD unit. Verify that the amber wireless icon
appears at the top of the display
screen within one minute. o o
2. On the Propaq MD unit, do the following:
• Press the More ( ) then the Setup
( ) quick access keys.
• Use the navigation keys to select
Supervisor>Communications.
• Use the navigation keys to enable
Wi-Fi, then select Configure.
• Highlight Add, then in the Add AP
Profile window, select DHCP setting,
and enter the desired settings for
Profile Name, SSID, Authentication,
and Security Key.
• Press the Display/Home ( ) key to
exit the menu.
o o
3. On the main display screen, do the
following:
• Use the Display/Home ( ) key and
then the navigation keys to highlight
the wireless icon.
• Use the navigation keys to highlight
Wi-Fi Access Point and select the
profile name you created in step 2. Verify that the Access Point name is
in the Selected Access Point field
o o
4.
Press to exit the menu.
Verify that the wireless icon turns
green. o o
5. On the main display screen, do the
following:
• Press the More ( ) then the Setup
( ) quick access keys.
• Use the navigation keys to select
Supervisor>Communications.
• Use the navigation keys to enable
Wi-Fi, then select Configure.
• Highlight the Access Point Name from
step 3, then select Delete.
Verify that the wireless icon changes
to amber. o o