Yokogawa DR240 User Manual

Page 17

Advertising
background image

2-7

IM DR231-11E

Overview and Specifications of RS-232-C Interface

2

XON-DTR

• Transmission data control

: A software handshake status is established between the recorder

and the host computer. The recorder will stop a data transmission
when an X-OFF signal is received from the host computer. The
data transmission will be resumed when the next X-ON signal is
received. The CTS signal from the host computer is ignored.

• Reception data control

: A hardware handshake status is established between the recorder

and the host computer. When the recorder recept of data becomes
impossible, an ‘DTR=False’ status will be established. When data
recept become possible, an ‘DTR=True’ status will be established.
RTS=True (Fixed).

CTS-RTS

• Transmission data control

: A hardware handshake status is established between the recorder

and the host computer. The recorder will stop a data transmission
if a ‘CTS=False’ status is established, and will resume the
transmission when a ‘CTS=True’ status is established. The X-
OFF and X-ON signals from the host computer are processed as
data.

• Reception data control

: A hardware handshake status is established between the recorder

and the host computer. An ‘RTS=False’ status will be established
when the recorder recept of data becomes impossible, and an
‘RTS=Ture’ status will be established when data recept becomes
possible. DTR=Ture (Fixed).

CTS-DTR

• Transmission data control

: A hardware handshake status is established between the recorder

and the host computer. The recorder will stop a data transmission
if a ‘CTS=False’ status is established, and will resume the
transmission when a ‘CTS=True’ status is established. The X-
OFF and X-ON signals from the host computer are processed as
data.

• Reception data control

: A hardware handshake status is established between the recorder

and the host computer. A ‘DTR=False’ status will be established
when the recorder recept of data becomes impossible and a
‘DTR=True’ status will be established when data recept becomes
possible. RTS=Ture (Fixed).

2.4 Handshake Format Selection

Advertising
This manual is related to the following products: