Yokogawa DR240 - Manual (Page 91)

7-15 IM DR231-11E
Output Format
7
7.12 RAM Disk Output Format (Channel On/Off)
The following formats are output by the TS3 + [GET] + MF3 command.
_NNNNNNNNCrLf
_CCC-MMMCrLf
_
--------------------
_ENDCrLf
Each symbol denotes the following:
NNNNNNNN: File name (eight characters)
CCC:
Channel number (three characters)
Channel for computation
A01 to A30 (stand alone model)/A01 to A60 (expandable model)
MMM: With/without data
ON -------- with data
OFF ------- without data
END: End
Note
• The channel for computation is output subsequent to the channel for measurement.
• If the RAM disk is faulty, the character string “# ERROR ON DATA MEMORY” will be output.
• If there are no appropriate files, the character string “# FILE NAME ERROR” will be output.