10 ram disk output format (ascii code) – Yokogawa DR240 User Manual
Page 87
7-11
IM DR231-11E
Output Format
7
7.10 RAM Disk Output Format (ASCII Code)
The following formats are output by the TS3 + [GET] + MF1 command.
Header
AAAAAA-BBBBBB, CCCCCC,DDD-EEECH, FFFFFGGGCrLf
YY-MM-DD hh:mm:ssCrLf
First Data Number
*SNNNNNCrLf
Date and Time
YY-MM-DD hh:mm:ssCrLf
First Data
S1S2UUUUUUCCC,
±
DDDDDE-EpCrLf
---------------------
Last Data Number
*SNNNNNCrLf
Date and Time
YY-MM-DD hh:mm:ssCrLf
Last Data
S1S2UUUUUUCCC,
±
DDDDDE-EpCrLf
Each symbol denotes the following:
Header
AAAAAA:
First output data (six characters)
BBBBBB:
Last output data (six characters)
CCCCCC:
Data number of trigger position (six characters)
DDD:
First output channel (three characters)
Channel for computation
A01 to A30 (stand-alone model)
A01 to A60 (expandable model)
EEE: Last output channel (three characters)
Channel for computation
A01 to A30 (stand-alone model)
A01 to A60 (expandable model)
FFFFF:
Data save interval (five characters)
GGG:
Unit of data save interval (three characters)
YY-MM-DD hh:mm:ss
Year-Month-Day Hour:Minute:Second
Data number
*:
Indicates information for data numbers.
S:
Trigger information
Space ------------------- other than a trigger point
T ------------------------- trigger point
NNNNN:
Data number (five characters)
Date and Time
Date and time when the data are saved.
The time is in 0.5-second units depending on the measurement interval used.
Data
S1:
Data status 1
N ------------------------ normal
O ------------------------ over (data of
±
99999)
S ------------------------- skip (data of all space)
E ------------------------- abnormal
S2:
Data status 2
Space ------------------- interim data
E ------------------------- last data
UUUUUU:
Units (six characters)
mV [ ] [ ] [ ] [ ] -------- mV
V [ ] [ ] [ ] [ ] [ ] ------- V
[ ] C [ ] [ ] [ ] [ ] -------
°
C
UUUUUU -------------- arbitrary