Yokogawa DR240 - Manual (Page 83)

7-7 IM DR231-11E
Output Format
7
7.6 Output Format for Unit and Decimal Point
Position
These outputs are issued in the following format by the TS2 + “Device Trigger (GET)” + LF
command.
S1S2CCCUUUUUU, PCrLf
Each symbol denotes the following:
S1:
Data status 1
N --------------------- Normal
D --------------------- Differential input
S ---------------------- Measurement range skips.
S2: Data status 2
Space ---------------- Interim data
E ---------------------- Final data
CCC: Channel number (3 characters)
Computation channels
A01 to A30 (DR130/231/241)
A01 to A60 (expandable models)
UUUUUU: Unit (6 characters)
mV ------- mV
V ------ V
C ------
°
C
UUUUUU ----------- arbitrary
P: Decimal point position (0 to 4)
0 ---------------------- 00000
1 ---------------------- 0000.0
2 ---------------------- 000.00
3 ---------------------- 00.000
4 ---------------------- 0.0000
Note
• Data in the channels not connected in the system settings, including channel numbers, are not output.