Yokogawa DR240 - Manual (Page 48)

5-5 IM DR231-11E
Command Format
5
5.4 Command List
Setting the Input
Command Content Effective mode
SR Range setting Operation mode
SN Unit setting (scale unit) Operation mode
XV Sample rate setting Setup mode
XI A/D integration time setting Setup mode
XQ Filter setting Setup mode
Setting Alarms
Command Content Effective mode
SA Alarm setting Operation mode
XA Setting related to alarm Setup mode
XY Relay reflash setting Setup mode
XN Relay AND/OR setting Setup mode
XD Relay energizing/deenergizing setting Setup mode
XH Relay hold setting Setup mode
Setting the Display
Command Content Effective mode
UD Setting the display mode on the upper part of the display Operation mode
MD Setting the display mode on the middle part of the display Operation mode
LD Setting the display mode on the lower part of the display Operation mode
XW Setting the switching time for the displayed channel Setup mode
Setting the Recording
Command Content Effective mode
SC Chart speed setting Operation mode
SE Second chart speed setting Operation mode
SS Select the trend records/logging records Operation mode
SZ Recording zone setting Operation mode
SP Partially expanded recording setting Operation mode
SG Message setting Operation mode
ST Tag setting Operation mode
SH Header setting Operation mode
SJ Title setting Operation mode
SF Format for list printing setting Operation mode
SB Interpolation setting Operation mode
PT Trend recording ON/OFF Operation mode
PD Digital recording ON/OFF Operation mode
PM Manual printing ON/OFF Operation mode
PA Alarm printing ON/OFF Operation mode
PC Scale printing ON/OFF Operation mode
PL List printing ON/OFF Operation mode
XR Performs settings related to records Setup mode
XC Dot printing colors setting Operation mode
Other Settings
Command Content Effective mode
SD Date and time setting Operation mode
SV Moving average setting Operation mode
SY Copy between channels Operation mode
SX Group setting Operation mode
SI Timer setting Operation mode
SQ Match time setting Operation mode
SL Event/action setting Operation mode
SO Computation expression setting (option) Operation mode
SK Computation constant setting (option) Operation mode
CM Setting of input data to be computed (option) Operation mode
MH Setting of channel number to save setting data (with a floppy disk drive) Operation mode
SW Setting of summer-winter time Operation mode