Edwards Signaling eFSA250 User Manual
Page 179
Advertising
Chapter 3: System operation
E-FSA64 and E-FSA250 Technical Reference Manual
167
To activate sensor bypass:
1. Press the Menu button and choose Control.
2. Enter a level one password.
3. Choose Activate/Restore.
4. Choose Sensor Bypass.
5. Select the device that you want to bypass.
6. Press Enter.
7. Press Cancel to return to the previous menu.
— or —
Press the Menu button to exit menu mode.
Main Menu
Reports
Test
Control
Program
Enter Password
0000
Control
Enable/Disable
Activate/Restore
Activate/Restore
Device
Panel NAC
Sensor Bypass
Gas Accel Response
Device Activate<>
xxx
Loop 1 Device 001
Advertising
This manual is related to the following products: