Edwards Signaling eFSA250 - Manual (Page 60)

Chapter 2: Front panel programming
48 E-FSA64 and E-FSA250 Technical Reference Manual
Table 17: Latched output device types [1]
Device type
Description
Continuous
nonsilenceable (latched)
For Class B latched output modules that output an unsynchronized
signal. Does not follow signal silence.
Continuous
nonsilenceable Class A
(latched)
For Class A latched output modules that output an unsynchronized
signal. Does not follow Signal Silence.
Relay nonsilence NC
(latched)
For relay devices functioning as latched output devices that open
when activated. Does not follow signal silence.
Relay nonsilence NO
(latched) latch
For relay devices functioning as latched output devices that close
when activated. Does not follow signal silence.
Relay nonsilenceable
(latched)
For Class B relay devices functioning as latched output devices.
Does not follow signal silence.
Supervised output
(latched)
For Class B latched output modules that output an unsynchronized
signal. Does not follow signal silence.
Supervised outputs Class
A (latched)
For Class A latched output modules that output an unsynchronized
signal. Does not follow Signal Silence.
[1] Table 27 on page 105 gives a full list of devices configurable as latched output devices.
Displaying the Program menu
Use the Program menu to access the options that let you program your panel.
To display the program menu:
1. Press the Menu button.
2. Choose Program.
3. Press Enter.
Setting the time and date
The first step in programming the panel is setting the time and date. You must do
this before using either the Auto Program or Advanced Program command.
To set the time and date:
1. Press the Menu button and choose Program.
2. Choose Date and Time.
Main Menu
Reports
Test
Control