Other commands, Enable advanced serial commands, Reset transmitter – Vaisala GMW90 User Manual
Page 62
Advertising
User's Guide _______________________________________________________________________
60 ___________________________________________________________________ M211659EN-B
Other Commands
Enable Advanced Serial Commands
Use the PASS command to enable the advanced serial commands.
PASS [passcode]<cr>
where
passcode = Passcode to enable advanced commands is 9000.
Example:
>pass 9000
Reset Transmitter
Use the RESET command to reset the transmitter.
RESET<cr>
Example:
>reset
Resetting
GMW95R / 1.1.28.5849 / XM90
>
Advertising