Product performance – Samsung SGH-T669AAATMB User Manual
Health and Safety Information 200
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of
the current signal strength by displaying a number of bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power Save feature is automatically activated. If your
phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty
service may void the warranty.
There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.
To ensure that the Hearing Aid Compatibility rating for your phone is maintained, secondary transmitters such as Bluetooth and
WLAN components must be disabled during a call. For more information, refer to “Activation” on page 158.
If your phone is equipped with an external antenna, hold the phone with the antenna raised, fully-extended and over your
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the internal antenna could inhibit call performance.
Speak directly into the phone's receiver.