Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 159)

DFX-8 Series Ultrasonic Flaw Detectors
155
13.6 Selecting a Language
The DFX-8 is equipped with a language option. Currently, only a few languages
supported. However, be sure to update your gauge firmware often, to check for
language additions. The steps to select a language are outlined as follows:
Selecting a Language
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the SETUP menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
2) Use the UP and DOWN arrow keys on the left button wheel to scroll
through the sub menu items until LANGUAGE is highlighted.
3) Press the LEFT and RIGHT arrow keys multiple times on the right
button wheel to toggle the language options.
4) Once the desired language is displayed, press the MEAS key to return to
the measurement screen.