Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 162)

Dakota Ultrasonics
158
Selecting Storage Device
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the XFER menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
2) Use the UP and DOWN arrow keys multiple times using the left button
wheel to scroll through the sub menu items until STORAGE is highlighted.
3) Use the LEFT and RIGHT arrow keys multiple times on the right button
wheel to toggle STORAGE internal/external. Note: Capture will be
displayed in a toolbar cell on the active display, indicating the feature is
enabled.
14.6 Copying Files (Setups, Data, & Screenshots)
The DFX-8 can store a number of setup, data and screenshot files to either the
internal or external SD memory cards. All the copy routines will copy files from the
currently selected storage device to the other. Therefore, if the current storage
device is set to ‘internal’, the copy routines will transfer files directly to the external
device. Note: If the DFX-8 is powered up without an external SD card inserted in the
slot, the copy routines in the XFER menu will be inactive. The steps below outline
the procedure for copying files from one storage device to the other as follows: