Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 22)

Dakota Ultrasonics
18
ANALOG OUTPUT: DFX-8+ only. Proportional outputs (amplitude or distance), 0-
10 volts. Speed is determined by the PRF setting. Refer to page 114 for further info.
SET DATE: Gives the user the ability to set the internal date and time stamp in the
DFX-8. Refer to page 113 for further info.
KEY CLICK: Gives the user the ability to set the level of the key press beeper OFF,
QUIET, or LOUD. Refer to page 117 for further info.
GAUGE: Gives the user the ability toggle the DFX-8 gauge type to either a flaw
detector, or a thickness gauge. Refer to page 3 for further info.
3.16 XFER (transfer) – Menu
COPY SETUPS: Copies setup files from either the internal or external SD memory
card to the other memory card, depending on the current internal/external setting of
Storage (current device being used to store data), located in the XFER menu. Refer
to page 158 for further info.
COPY DATA: Enables the user to copy all, or individual grid/log files from either the
internal or external SD memory card to the other memory card, depending on the
current internal/external setting of Storage (current device being used to store data),
located in the XFER menu. Refer to page 158 for further info.
COPY SCREENS: Copies screen capture (.tif’s) files from either the internal or
external SD memory card to the other memory card, depending on the current
internal/external setting of Storage (current device being used to store data), located
in the XFER menu. Refer to page 158 for further info.
UPGRADE GAUGE: Enables the user the ability to upgrade the DFX-8 to the most
current firmware revision. Refer to page 160 for further info.
STORAGE: Enables the user to select which SD memory card to use for storage.
Note: if no card exists in the external reader slot, this option will be grayed out and
inactive. Refer to page 157 for further info.
ABOUT: Provides the user with Dakota Ultrasonics contact information and the
DFX-8 firmware & FPGA versions. Refer the Dakota Ultrasonics web site for
information on the latest firmware versions available for download.
3.17 CLR (clear) Key