Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 24)

Dakota Ultrasonics
20
The ENTER key is used in the overall menu selection process, to activate list and
edit boxes, display and save measurements/waveforms to grid or sequential file
locations.
3.23 MULTI MODE Key
The MULTI MODE key is only used in the thickness gauge portion of the DFX-8.
3.24 DATA Key
The DATA key opens the tabbed data menu, allowing a user to efficiently create a
new log/grid file for storage.
3.25 STORE Key
The STORE key displays the current log/grid opened in split screen mode. If no
log/grid file is open, the STORE key will open the tabbed data menu in order create a
new, or open an existing log/grid file for storage.
3.26 PEAK Key
The PEAK key is a feature used in the flaw detector portion of the DFX-8, and is not
used in the thickness gauge. It is also used to activate the COMPARE feature
located in the UTIL menu
3.27 FREEZE Key
The FREEZE key is used to freeze the display for evaluation/review of what’s
currently on the display. It is also used in conjunction with the CAPTURE feature to
save the current display to a .tif (tagged image) graphic file that can be opened using
any graphics viewer.
3.28 ON/OFF Key