Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 52)

Dakota Ultrasonics
48
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the CAL menu is highlighted and displaying the submenu items, as shown in
the screenshot above. Alternatively, press the LEFT and RIGHT arrow
keys multiple times using the left button wheel.
2) Use the UP and DOWN arrow keys multiple times on the left button
wheel to scroll through the sub menu items until MATL 2PT is highlighted.
3) Press the ENTER key to display the Digits Edit Box.
4) Press the UP and DOWN arrow keys multiple times on the left button
wheel to scroll the highlighted value.
5) Press the LEFT and RIGHT arrow keys multiple times using the left
button wheel to scroll the digit locations.
6) Repeat steps 4 & 5 until the known thickness value is correctly displayed.
7) Press the OK key to calculate the velocity and return to the menu screen, or
ESC to cancel the one point calibration.