Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 65)

DFX-8 Series Ultrasonic Flaw Detectors
61
inspection, and should additionally be setup prior to enabling the AWS feature. Refer
to Chapter Six for instructions on setting up TRIG mode.
For quick access and editing, refer to navigating the Hot Menus page 22.
Activating & Setting AWS
Activate Trig Mode
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the AWS menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
2) Use the UP and DOWN arrow keys multiple times on the left button
wheel to scroll through the sub menu items until AWS is highlighted.
3) Press the LEFT and RIGHT arrow keys on the right button wheel to
toggle the AWS feature ON. The menu items should now become active
and adjustable, as illustrated above.
Toggle Curve On/Off
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,