Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 40)

Dakota Ultrasonics
36
4) Press the LEFT and RIGHT arrow keys multiple times using the left
button wheel to scroll the digit locations.
5) Repeat steps 3 & 4 until the start position is correctly displayed.
6) Press the OK key to set the GATE1 start position and return to the menu
screen, or ESC to cancel entering the GATE1 start position.
Note: This is where the gate first turns on relative to the horizontal axis or
depth. Sets the left boundary of the gate, or where it turns on.
Set Gate1 Width
1) Press the UP and DOWN arrow keys multiple times on the left button
wheel until GATE1 WIDTH is highlighted, followed by pressing the
LEFT and RIGHT arrow keys multiple times using the left button wheel to
scroll the value. When the correct width is displayed, proceed to the next
menu item setting.
2) Alternatively, press the ENTER key to display the Digits Edit Box.
3) Press the UP and DOWN arrow keys multiple times on the left button
wheel to scroll the highlighted value.
4) Press the LEFT and RIGHT arrow keys multiple times using the left
button wheel to scroll the digit locations.
5) Repeat steps 3 & 4 until the Width is correctly displayed.
6) Press the OK key to set the GATE1 WIDTH and return to the menu screen,
or ESC to cancel entering the GATE1 WIDTH.
Note: This sets the overall width of the gate in terms of the horizontal axis or
depth. Sets the right boundary of the gate, or where it turns off.
Set Threshold1 Level