Dakota Ultrasonics DFX-8 plus MANUAL1 - Manual (Page 161)

DFX-8 Series Ultrasonic Flaw Detectors
157
14.4 Using the XFER menu (DFX-8)
The XFER menu of the DFX-8 will be used in conjunction with the DakView PC
software. The steps below outline the procedure for accessing the XFER menu and
basic operation as follows:
Accessing and Using the XFER Menu
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the XFER menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
2) Use the UP and DOWN arrow keys on the left button wheel to scroll
through the sub menu items until the desire option is highlighted.
3) Press the ENTER key to activate the option selected.
14.5 Selecting Storage Device
The DFX-8 has two storage device options available. The DFX-8 is shipped from the
factory with a 4 gig internal SD memory card on the board itself, and additionally has
an external SD card reader. The SD reader is located above the Li-Ion battery pack,
under the battery cover. The STORAGE utility simply selects which card is currently
being used as the primary storage device. This storage switch is also used in
conjunction with all the copy utilities found in the XFER menu. For example; if the
storage switch is set to internal as the primary storage device, all the copy routines
will copy from the internal to the external reader, or visa versa. The procedure to set
the storage device is outlined below: