INFICON XTM/2 Thin Film Deposition Monitor - Manual (Page 20)

1 - 4
IP
N 07
4-
18
6S
XTM/2 Operating Manual
1.1.4 Main Power Connection
WARNING
This instrument has a line voltage present on the
primary circuits whenever it is plugged into a main
power source.
Never remove the covers from the instrument during
normal operation.
There is no operator serviceable items within this
instrument.
Removal of the top or bottom covers must be done
only by a technically qualified person.
In order to comply with accepted safety standards, this
instrument must be installed into a rack system which
contains a mains switch. This switch must break both
sides of the line when it is open and it must not
disconnect the safety ground.