INFICON XTM/2 Thin Film Deposition Monitor User Manual
Page 36
Advertising
2 - 10
IP
N 07
4-
18
6S
XTM/2 Operating Manual
9—
Access to adjust LCD contrast, see
.
10—
Enter and cursor down. Two function switch used when the display is in the
program mode.
11— DIGITS (0-9)
Decimal based key pad for data entry.
a. If the zero key is held down during power-up, the communications
interface may be configured (see
b. If the nine key is held down during power-up, all of the LCD segments
will remain lit until the key is released, see
12—
Clear and cursor up. Two function switch that is used when the display is
in the program mode.
13—
Optional mounting kit, (IPN 757-212-G1) for mounting one unit in full rack
or (757-212-G2) for mounting two units side by side in full rack.
Advertising