INFICON XTM/2 Thin Film Deposition Monitor - Manual (Page 46)

2 - 20
IP
N 07
4-
18
6S
XTM/2 Operating Manual
2.5.6 Sensor
High density 15-Pin female "D" type input connectors for intelligent oscillators
(IPN757-302-G1). These oscillators are normally supplied with 15’ (4.572 m)
cables as IPN 757-305-G15. These are specifiable as 30’ (9.144 m) and 100’
(30.28 m) by changing the group (G-xx) designation to 30 or 100, respectively.
Figure 2-14 15-Pin Type "D" Female Connector
2.5.7 International Warning Symbol for
Users and Technicians
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the instrument.
2.5.8 Recorder
A BNC type connector that supplies analog voltage proportional to rate or
thickness (mass). The specific function is determined by configuration switches
9-14, refer to
section 2.5.2 on page 2-15 .
Figure 2-15 BNC Connector