2 configuration switches 1 & 2, Section 2.5.2, Caution – INFICON XTM/2 Thin Film Deposition Monitor User Manual
Page 41
Advertising
2 - 15
IP
N 07
4-
18
6S
XTM/2 Operating Manual
2.5.2 Configuration Switches 1 & 2
Two eight position DIP switches used to customize the instrument as follows.
Figure 2-10 Configuration Switch
CAUTION
The configuration switches are only read on
instrument power up. If an option is changed the
instrument must be switched to standby and then
powered up to effect the change.
Advertising