Kinze 3200 Wing-Fold Planter Rev. 7/14 - Manual (Page 106)

M0241-01 Model 3200
6-16 6/11
TM
KPM II Monitor Operation
Lower LCD shows speed (MPH or KM/H) at power up.
Press UP or DOWN arrow keys to
move flashing arrow on lower LCD to
change what is displayed.
Press the shortcut keys SPEED, SEED POPULATION/
SEED SPACING or AREA FIELD/TOTAL for direct
access to these displays.
Press SEED POPULATION/SEED SPACING or AREA
FIELD/TOTAL keys to alternate between the two
functions assigned to that key.
Press SEED POPULATION/SEED
SPACING key to choose average seed
spacing/population per acre.
Press SCAN key to display individual
rows starting at row 1.
Press SCAN key again to lock on
current row.
Press SCAN key again to resume
scrolling.
Use UP or DOWN arrow keys to move
to a particular row.
Press SEED POPULATION/SEED
SPACING key to go back to planter
average.
CLEARING FIELD AREA
(MTR29n/MTR28b)
To reset the counter, press the UP or DOWN
arrow keys to move the arrow in the lower
display to FIELD AREA.
Press UP and DOWN arrow keys at the same
time and hold them down for a short period of
time to clear data. The CLEAR? icon displays
and the monitor beeps several times. When
data is actually cleared, the monitor emits a
long beep and the field area is reset to zero.
After the long beep, the previous field area
recorded is not retrievable.
NOTE: Clearing the field area counter will not clear the total
area counter. See “Programming-Clearing Total Area” for
clearing total area.
Press the OK key to silence alarms. See “Warnings
And Alarms”.