Kinze 3200 Wing-Fold Planter Rev. 7/14 - Manual (Page 141)

TM
Model 3200 M0241-01
6/11 7-1
Lubrication and Maintenance
LUbRICATION
Following pages show locations of all lubrication points. Proper lubrication of moving parts helps ensure efficient
operation of your Kinze planter and prolongs the life of friction producing parts.
LUbRICATION SyMbOLS
SEALED bEARINGS
Sealed bearings are used on your Kinze planter to provide
trouble free operation.
These are located on drive shafts, row units, and transmission
bearings. Sealed bearings are lubricated for life and not
serviceable.
WARNING
Uncontrolled machine movement can crush or cause loss of
control resulting in death, serious injury, or damage to property and
equipment. Install all safety lockup devices before working under or
transporting this equipment.
WRAP SPRING WRENCH ASSEMbLy
Components may require occasional lubrication to operate
correctly. Disassembly is required to lubricate.
1. Remove ¼ "-20 x ½" cap screw that secures idler assembly
to wrap spring wrench tightener shaft.
2. Remove wrap spring wrench from planter.
3. Tip wrap spring wrench on its side and lubricate with a
high quality spray lubricant. Lubricant must be absorbed
into wrap spring area.
4. Reinstall wrap spring wrench on planter.
Wrap Spring Wrench Lubrication
Lubricate at frequency indicated
with an SAE multipurpose grease. Lubricate at frequency indicated
with a high quality SAE 10 weight
oil or a quality spray lubricant.