Kinze 3200 Wing-Fold Planter Rev. 7/14 User Manual
Row Unit Operation
qUICK ADJUSTAbLE DOWN FORCE SPRINGS OPTION (STANDARD OR HEAVy DUTy)
Standard and heavy duty quick adjustable down force springs are available in increase penetration in hard soil and
keep row unit from bouncing in rough field conditions. Two springs per row, one on each side parallel arms, are used
unless equipped with row unit mounted no till coulters. Row unit mounted no till coulters require four springs per row.
Springs must be installed with open side of spring hooks toward
seed hoppers to prevent binding on spring mount adjustment pins.
1. Raise planter and remove spring mount pin at top of spring.
2. Slide mount to desired position and install pin.
NOTE: Adjust springs for field conditions. Too much down pressure in hard field conditions
can cause row units to lift planter and keep drive wheels from making contact. Too much down
pressure in soft field conditions can cause row unit to run too deep.
There are four positions to set down pressure spring tension.
Four Springs Per Row (quad)
Two Springs Per Row (Dual)
Position 1 (Least)
Position 4 (Most)
Standard and Heavy Duty Spring Down Force Pressure*
41lb (18.6 kg)
43 lb (19.5 kg)
74 lb (33.6 kg)
80 lb (36.3 kg)
73 lb (33.1 kg)
86 lb (39.0 kg)
120 lb (54.4 kg)
144 lb (65.3 kg)
136 lb (61.7 kg)
167 lb (75.7 kg)
255 lb (115.7 kg)
307 lb (139.3 kg)
207 lb (93.9 kg)
249 lb (113.0 kg)
369 lb (167.4 kg)
470 lb (213.2 kg)
*Pressure does not include weight of row unit, seed, or options.