Kinze 3200 Wing-Fold Planter Rev. 7/14 - Manual (Page 30)

M0241-01 Model 3200
2-18 6/11
TM
Machine Operation
A tire scraper prevents buildup of dirt and mud between wheel
arm assembly and tire.
Adjust scraper so it does not contact tire.
Tire scraper
Scraper
TIRE SCRAPER
SHEAR PROTECTION
NOTICE
Misaligned drill shaft/transmission coupler can cause equipment
damage.
3. Check driveline alignment and follow prescribed lubrication schedules to prevent component binding or breakage.
3∕16 " shear pin
Drill shaft/transmission coupler
Transmission shaft and drill shaft coupler
Install axle here to raise bar
height for ridge planting.
Shear pins protect the planter driveline and row unit
components from damage.
1. Determine where binding has occurred before
replacing a pin. Turn shaft by hand (with the aid of a
wrench) and check for misalignment and seized parts.
2. When shaft can be turned by hand (with the aid of a
wrench) replace shear pins with same size and type.
Spare shear pins are in wheel module storage area.
RIDGE PLANTING
Planter toolbar height can be raised 3" for ridge planting.
Relocate 20" transport axles to lower hole in wheel arm.
Ridge planting adjustment