Kinze Ag Leader Integra - Manual (Page 106)

90 Firmware Version 5.2
Once a Virtual Terminal has been enabled
will appear in the task bar. Toggle between the
Virtual Terminal run screen and other display
functions by pressing the VT button.
• Broadcast GPS Speed
Checking this box allows the implement to use GPS
ground speed that has been gathered by the display.
• Auxiliary Module Support
Assign implement functions to ISO compatible inputs.
• Virtual Terminal Functional Instance
Always set to 0 except when there are multiple VTs on the ISO Bus. Use to change instance.
Reboot Display
• Task Controller Function Instance
Always set to 0 except when there are multiple TCs on the ISO Bus. Use to change instance.
Reboot Display
When an ISOBUS compliant implement
is connected to the display for the first
time, the implement WSM sends its
graphic interface, called the Object Pool,
to the display. Status bar (A) appears
while Object Pools are being loaded. This
process might take several minutes
depending on the number of Object Pools
being loaded. Once loaded, object pools
are stored in the display memory.
Virtual Terminal
Enable Virtual Terminal
Broadcast GPS Speed
Auxiliary Module Support
Task Controller
Enable Task Controller
Function Instance Function Instance
Note: Only Function Instance 0 allows
modifying auxiliary assingnments.
0
ISOBUS Settings