Liquid rate control, Create configuration, Application – Kinze Ag Leader Integra User Manual
Page 233: Iquid, Ontrol
217
A
PPLICATION
L
IQUID
R
ATE
C
ONTROL
A
PPLICATION
A
PPLICATION
L
IQUID
R
ATE
C
ONTROL
DirectCommand allows the variable rate application of single or multiple liquid products. Follow the
procedure below to create an operating configuration.
C
REATE
C
ONFIGURATION
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > Add
(+) button > Application button
1. Select Vehicle
Use drop-down menu to choose a vehicle, or press
to enter a new vehicle. Press
to
continue.
Note:
If selecting Self-Propelled Sprayer from the drop-down menu skip steps 2 and 4.
2. Select Implement
Select an implement from the drop-down list menu, or press
to create a new implement. Press
to continue.
3. Enter Implement Make and Model
Press
to enter Make and Model name. Press
to continue.
4. Select Implement Attachment Type
Use the drop-down list to select an implement attachment method. Press
to continue.
5. Add Sprayer Functionality
Press
to add sprayer functionality to the implement.
6. Select Controller
Use the drop-down menu to select a controller or press
to add a controller. Press
to
continue.
7. Assign Container Name
Container names default to Main Tank. Press
to enter a new name if desired.
8. Assign Container Capacity
Press
to enter the container capacity. Press
to accept.
9. Enter Container Units
Use the drop-down menu to select the container units.
Configuration
Application
Liquid
Application