Load configuration, Run configuration, Load configuration run configuration – Kinze Ag Leader Integra User Manual

Page 268: Onfiguration

Advertising
background image

252

Firmware Version 5.2

3. Acknowledge the Warning

A warning appears, stating that you must circulate the product back to the Direct Injection tank.

Acknowledge the warning by pressing

.

4. Start Pump and Set Desired Speed
The Injection Pump Prime screen appears. The
countdown time remaining is shown in the black box.
The bar underneath turns green when the pump is

operating. Use

/

to manually increase or

decrease the pump speed.

Note: The recommended priming time is three minutes (3:00), but the routine can be ended at any time by

pressing .

5. Acknowledge the Warning. A warning appears, stating that you must return chemical injection

plumbing to a field-ready state. Acknowledge the warning by pressing

.

L

OAD

C

ONFIGURATION

Press: Select Event button.

Select a Season, Grower, Farm, and
Field on the Management Selection

screen.

For more information, see

“Setup Event” on page

49

.

R

UN

C

ONFIGURATION

Once a configuration has been completed, the Map View button appears at the bottom of the
Home screen. Press the Map View button to see the Map screen. The map below is displayed
in Zoom to Detail view.

Injection Pump Prime

Use increase/decrease arrows to start pump and set to desired speed.

Time Remaining

Select Event

Advertising