Shift, Hift, Nudge – Kinze Ag Leader Integra User Manual

Page 148

Advertising
background image

132

Firmware Version 5.2

Nudge allows you to adjust the

swaths by a specified distance.

Small Nudge (single arrow) shown on left.

Large Nudge setting (double arrow) shown on
right (Straight Patterns Only).

Use Nudge toggle button

to

switch between Small and Large Nudge setting.

Use Mapping Toolbox toggle button

to

switch the menu between Tramline and Nudge on

the Mapping Toolbox, if Tramlines are enabled.

Press: Map button > Guidance tab (in Mapping Toolbox) > Setup (wrench) button > Nudge tab

Press the Setup (wrench) button then the

Nudge tab to make adjustments to Nudge settings.

• Press

to enter a distance for increment that

the swaths will move with each successive press of the
left or right arrows buttons on the Guidance Tab.

• To clear out the adjustment and go to the original
position, press Clear Nudge.

Screen shows Small and Large increment settings
for Straight path. Other Patterns will only show the
small increment setting.

S

HIFT

Press: Map button > Guidance tab (in Mapping Toolbox) > Setup (wrench) button > Shift tab

Reset

Nudge: 30.0 in

Total: 0.0 in

Straight

Reset

Nudge: 90.0 in

Total: 0.0 in

Straight

Nudge: 30.0 in

Total: 0.0 in

Nudge

Nudge

Tramlines

Shift

Lightbar

Pause

Small Increment:

Clear Nudge

Guidance Options

Remark A

Large Increment:

30.0 in

Total Nudge:

90.0 in

0 in

Save

Save
Group

Shift

Advertising