Kinze Ag Leader Integra - Manual (Page 155)

139
G
UIDANCE
O
N
T
RAC
2+
The Control Point of a vehicle is defined as:
• Standard Wheeled Vehicle (MFWD, Floater, Sprayer) - Rear Axle
• Track Vehicle - Center of tracks
• Articulated Tractor - Pivot point of vehicle
• Combine/Swather - Front Axle
Press .
8. Enter Antenna Lateral Offset. Select Left or Right. Press .
Note: The Antenna Lateral Offset value is tested and adjusted (if necessary) after vehicle creation
and calibration is complete. Use left or right buttons to indicate if antenna is left or right of the
vehicle’s center. If the antenna is perfectly centered, it does not matter which button is pressed as
long as the measurement is zero.
9. Enter Antenna Height, and then press the checkmark button.
The Wizard now takes you to the Manual Steering Override kickout limit setting procedure. When the
Manual Steering Override calibration is complete, the Setup Wizard starts the Auto Calibrate procedure.
M
ANAGE
V
EHICLE
Press: Vehicle button > Manage Vehicle button
The Manage Vehicle screen enables you to:
select the active vehicle
change vehicle parameters
delete vehicle
import and export vehicle profiles
S
ELECT
Select Vehicle
Press: Vehicle button > Manage Vehicle button > Select Vehicle > Select button
To make a vehicle profile the Active Vehicle, select vehicle from list and press the Select button. The
confirmation box will appear. Press the checkmark button and then Back icon to return to the AutoSteer
Setup menu.
Vehicle
Manage
Vehicle
Select
Edit
Delete
Export/
Import
Vehicle
Manage
Vehicle
Select