Lenze EMF2141IB - Manual (Page 51)

Parameter setting
6-29
L
BA2141 EN 1.0
6.4.2.13 Default value for nviDrvSpeedScale
network input config_lev_percent nciDrvSpeedScale;
This value determines the default setting for nciDrvSpeedScale . The current configuration
variable nciDrvSpeedScale is overwritten with the default value
•
after a reset or
•
if the time from nciRcvHrtBt passes without an update of the variable nciDrvSpeedScale .
Input range
The possible bandwidth for the input variable is between -163.840 % and 163.830 % (resolution
0.005 % ).
The value +163.835 % (7FFF
hex
) is assumed to be wrong.
Standard value
0
SCPT Reference
SCPTdefScale (162)
Show/Hide Bookmarks