2 configuration of the lon network, 1 configuration of the lon network, Configuration of the lon network – Lenze EMF2141IB User Manual
Page 79: Appendix
Appendix
8-3
L
_^ONQN bk NKM
8.2
Configuration of the LON network
The LONMaker
t
for Windows
®
helps to configure your drive. We use the software version 3.00.66
of LONMaker
t
for Windows
®
which is only available in English at the time of this print.
The windows can be installed under Windows95
®
, Windows98
®
or WindowsNT
®
. The configuration
is explained by examples but only as much as needed for the operation of Lenze controllers.
8.2.1
Configuration of the LON network
1. Insert new device connected to the network
Click the symbol “ Device” and
0
shift it to where you need it.
0
2141LON105
2. Go to the dialog box
Device Name and enter the name of the device. Highlight the function
Commission Device.
2141LON106
3. Assignment of interface specification of the connected device
After the device name has been entered (see figure above), it must be linked with the device
connected to the network.
Tip!
This link is necessary no matter whether you want to use a different device later or load a new
application to the device.
Show/Hide Bookmarks