Lenze EMF2141IB - Manual (Page 8)

Preface and general information
1-2
L
BA2141 EN 1.0
1.2.1 Legal regulations
Labelling Nameplate CE mark Manufacturer g
Lenze 2141 fieldbus modules are
unambiguously identified by their nameplates. Conforms to the EC Low Voltage Directive Lenze Drive Systems GmbH
Postfach 101352
D-31763 Hameln
Application as
directed
Fieldbus module 2141
• Operate the fieldbus module only under the conditions prescribed in these Operating Instructions.
• The fieldbus module is an additional module and can be optionally attached to the Lenze controller series 820X, 821X, 822X, 8200 vector
and 93XX. The 2141 fieldbus module links these Lenze controllers with the standardized serial communication system LON.
• The fieldbus module must be attached and electrically connected so that it complies with its function and does not cause any hazards when
attached and operated as instructed.
• Observe all notes given in chapter „Safety information“ ^ 2-1.
• Please observe all information given in these Operating Instructions.This means:
– Read these Operating Instructions carefully before you start to work with the system.
– These Operating Instructions must always be available during operation of the fieldbus module.
Any other use shall be deemed as inappropriate!
Liability • The information, data, and notes in these instructions met the state of the art at the time of printing. Claims referring to drive systems
which have already been supplied cannot be derived from the information, illustrations, and descriptions given in these Operating
Instructions.
• The specifications, processes, and circuitry described in these instructions are for guidance only and must be adapted to your own specific
application. Lenze does not take responsibility for the suitability of the process and circuit proposals.
• The specifications in these Instructions describe the product features without guaranteeing them.
• Lenze does not accept any liability for damage and operating interference caused by:
– disregarding these Instructions
– unauthorized modifications to the controller
– operating errors
– improper working on and with the controller
Warranty • Warranty conditions: see Sales and Delivery Conditions of Lenze Drive Systems GmbH.
• Warranty claims must be made to Lenze immediately after detecting the deficiency or fault.
• The warranty is void in all cases where liability claims cannot be made.
Disposal Material recycle dispose p
Metal D -
Plastic D -
Assembled PCBs - D
Operating Instructions D
Show/Hide Bookmarks