2 open gdc from the lonmakert, Open gdc from the lonmakert, Appendix – Lenze EMF2141IB User Manual
Page 78
Advertising
![background image](/manuals/566037/78/background.png)
Appendix
8-2
L
_^ONQN bk NKM
8.1.2
Open GDC from the LONMaker
t
Global Drive Control (GDC) is automatically opened through the installed plug-in if you select the
following from the shown context menu (right mouse key in the working area of LONMaker
t
):
•
Start GDC directly under Configure...
2141LON007
•
or start GDC indirectly through Plug-Ins....
Activate the ’GDCWrapper’ in the selection box that will open.
2141LON008
Go to GDC and press the function key F2 (
Find drive) to set the parameters for the drive. An online
connection with the connected controller is necessary.
Show/Hide Bookmarks
Advertising