Lenze EMF2141IB - Manual (Page 7)

Preface and general information
1-1
L
BA2141 EN 1.0
1 Preface and general information
1.1 How to use these Operating Instructions
•
These Operating Instructions are intended for safety-relevant working on and with the 2141
fieldbus module. They contain safety information which must be observed.
•
All personnel working on and with the 2141 fieldbus module must have these Operating
Instructions available and observe the information and notes relevant for them.
•
The Operating Instructions must always be complete and perfectly readable.
These Operating Instructions contain the most important technical data and describe the
installation of the 2141 fieldbus module. They are only valid in combination with the Operating
Instructions of the corresponding controller.
1.1.1 Terminology used
Controller In the following, the term ”controller” is used for ”93XX servo inverters” or ”82XX frequeny inverters”.
Drive system In the following, the term ”drive system” is used for drive systems with fieldbus modules or other Lenze drive
components.
Field bus module In the following text, the term ”fieldbus module” is used for the fieldbus module type 2141 LON.
Cxxx/y Subcode y of code Cxxx (z.B. C0410/3 = subcode 3 of code C0410)
Xk/y Terminal strip Xk/terminal y (z.B. X3/28 = terminal 28 on terminal strip X3)
( ^ xx-yyy) Cross reference (chapter - page)
1.2 Packing list
Scope of supply Important
• 1 2141 fieldbus module with housing (enclosure IP20)
• 1 M3 fixing screw
• 1 2-pole plug connector for voltage supply
• 1 2-pole plug connector for LON
After the delivery has been received, check immediately whether the
items supplied match the accompanying papers. Lenze does not
accept any liability for deficiencies claimed subsequently.
Claim
• 1 2-pole plug connector for LON
• 1 Mounting Instructions
• 1 floppy
Claim
• visible transport damage immediately to the forwarder
• visible deficiencies/incompleteness immediately to your Lenze
representative.
Show/Hide Bookmarks