Rockwell Automation 20Y PowerFlex Active Front End - Manual (Page 108)

108 Rockwell Automation Publication 20Y-UM001E-EN-P - July 2014
Chapter 4 Programming and Parameters
COMMUNIC
AT
ION
Da
ta
lin
ks
170
171 [Data In A1] - Link A Word 1
[Data In A2] - Link A Word 2
Sets the parameter number whose value is written from a communication device data table.
If parameters that can only be changed while the unit is stopped are used as datalink inputs, they are not
updated until the unit is stopped.
See the communication adapter User Manual for datalink information. Default:
Min/Max:
Units:
0 (0 = Disabled)
0/236
None
172
173 [Data In B1] - Link B Word 1
[Data In B2] - Link B Word 2 See [Data In A1] - Link A Word 1 [Data In A2] - Link A
Word 2 .
174
175 [Data In C1] - Link C Word 1
[Data In C2] - Link C Word 2 See [Data In A1] - Link A Word 1 [Data In A2] - Link A
Word 2 .
176
177 [Data In D1] - Link D Word 1
[Data In D2] - Link D Word 2 See [Data In A1] - Link A Word 1 [Data In A2] - Link A
Word 2 .
180
181 [Data Out A1] - Link A Word 1
[Data Out A2] - Link A Word 2
Sets the parameter number whose value is written to a communication device data table. Default:
Min/Max:
Units:
0 (0 = Disabled)
0/236
None
182
183 [Data Out B1] - Link B Word 1
[Data Out B2] - Link B Word 2 See [Data Out A1] - Link A Word 1 [Data Out A2] -
Link A Word 2 .
184
185 [Data Out C1] - Link C Word 1
[Data Out C2] - Link C Word 2 See [Data Out A1] - Link A Word 1 [Data Out A2] -
Link A Word 2 .
186
187 [Data Out D1] - Link D Word 1
[Data Out D2] - Link D Word 2 See [Data Out A1] - Link A Word 1 [Data Out A2] -
Link A Word 2 .
Fil
e
Gr
oup
No. Parameter Name & Description Values